ورود |  خدمات | رویدادها | سوالات متداول 
Logo
 

·         فروش انواع سيستهاي سرومکانيزم کمپانيهاي Lenze ، TRM ، Kubler، Faulhaber، Maxon ، Dunkermotoren، Servo-tek، Empire magnetics، LS Mecapion ، HENGSTLER ، Omron ، Animatics، Lika، mitsubishi ،Fanuc و Groschopp به همراه خدمات مشاوره و تأمين انکودرهای دورانی و خطی با دقت بسيار بالا از شرکتهای چون Heidenhain و Stegmann و Kuebler

maxon

Servo systems - drives & motors

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Dynamic and precise

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Modern systems are often designed in such a way that products can be replaced quickly and without complication. If a high degree of response and accuracy are also required, Lenze’s servo drive systems offer the necessary flexibility. Combined drive controller and servo motor packages featuring perfectly matched components provide solutions for a wide variety of requirements. Compared to mechanical and pneumatic solutions, servo technology is not only more responsive and accurate, but also better value for money and more wear resistant.

9400 Servo Drives

Servo technology intelligently simplified
9400 Servo Drives cannot fail to impress thanks to a revolutionary electromechanical assembly concept. Installation, assembly and application have been made easier than ever by breaking the link between installation backplane and drive electronics.

A modular structure
Tailoring the modular drive system to your application is easy. We would be delighted to do this for you and supply you with a tested complete system which you will simply need to install and put into operation.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

Highline 9400 Servo Drives
The new servo controller for simple and complex drive tasks. Designed for decentralised control tasks. Its power, function and equipment can be scaled.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

Drive based Safety
Its application defines the safety functions needed.

 

 

 

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Servo inverters

Intelligent solutions for various tasks

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gifOur solutions are as diverse as your applications. Select the optimal solution for your plant from our servo inverter series.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

ECS servo system
Dynamic servo modules, designed specifically for multi-axis applications with high dynamics and drive performance. Easy commissioning thanks to preinstalled drive solutions.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

9300 servo inverter
The intelligent drive for modular machines, available in four versions: Servo drive; Positioner; Cam profiler and Register controller - there is a servo for every application.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

9300 Servo PLC
The 9300 servo PLC is a servo inverter with a powerful integrated PLC.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

930 Servo Drives
Multi and single-axis operation with high functionality and minimum space requirements.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

930 fluxxtorque
Decentralised servo inverters with integrated positioning control in 3 versions in the power range 140 - 650 W.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview


The PostionServo series offers basic torque and velocity control to fully programmable coordinated motion.

 

 

 

Prepared Solutions

Complexity made simple

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gifMake the most of our experience in solving your drive task and benefit from the simple parameterization of a complete application. A combination of the tried-and-tested 9300 servo inverter and the innovative Prepared Solution software will form the basis for this, offering the benefits of:

  • High level of operational reliability
  • Simple commissioning through integration in the Global Drive Control
  • Save time and money by parameterisation
  • Easy to integrate into existing topologies
  • Your own IEC61131-3 code can be added as an option

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

Flying Saw
Software solution for "Flying Saw" applications.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

Cross Cutter
Software solution for "cross cutter" or "rotary knife" applications.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

 

Servo motors

Responsive - compact - reliable

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gifLenze servo motors meet the highest quality requirements within the context of drive technology and feature a modular and application-oriented design. Forming an integral part of a drive axis, they are easy to install and enjoy a long, maintenance-free service life. The motors are universally compatible with the Lenze gearbox ranges.

Expand your horizons with the appropriate accessories .

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

MCS synchronous servo motors
These motors provide a high degree of response and optimum smooth running characteristics in conjunction with excellent power-to-size ratio, a torque range of 0.8 to 191 Nm. cURus- and GOST-approved as standard.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

MCA asynchronous servo motors
Low moment of inertia, excellent power-to-size ratio and high degree of operational reliability by design with a torque range of between 2.0 and 300 Nm. cURus- and GOST-approved as standard.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

New MCA asynchronous servo motors
Extension of the tried-and-tested MCA range to include 3 models with a new design offering up to 1100 Nm torque. These motors with IP54 and IP23 enclosures come as standard with generously dimensioned insulated bearings.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

MDFQA asynchronous servo motors
For demanding continuous operation at high torques, enclosed-ventilated, long service life, wide speed control range, torques from 66 to 1600 Nm.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

New MQA asynchronous servo motors
Enclosed-ventilated, highly dynamic asynchronous servo motors with high power density and torques of up to 1100 Nm. The units come as standard with generously dimensioned insulated bearings to ensure a high degree of availability and long service life.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

MDXKS synchronous servo motors
Responsive synchronous servo motors for a torque range of between 0.6 and 52 Nm, naturally ventilated or with separate fan.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

SDSGS synchronous servo motors
Smooth surfaces and natural ventilation for application in harsh ambient conditions. In the torque range from 0.45 to 2,2 Nm.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

SDSGA asynchronous servo motors
Smooth surfaces and natural ventilation for application in harsh ambient conditions. In the torque range from 0.27 to 1.9 Nm.

http://www.lenze.co.uk/lenze.uk_en_active/images/system/spacer.gif

Preview

MDSLSBS servo spindle motors
A mechatronic unit specially developed for use with welding guns, presses and in folding applications.

 

 

faulhaber

 

Brakes

http://www.faulhaber.com/upload/P1258960098154.jpg

http://www.faulhaber.com/images/t.gif

http://www.faulhaber.com/images/kn5.gif

http://www.faulhaber.com/images/t.gif

Linear current/torque and speed/back-EMF characteristics

http://www.faulhaber.com/images/kn5.gif

http://www.faulhaber.com/images/t.gif

Low rotor inertia – short time constant

http://www.faulhaber.com/images/kn5.gif

http://www.faulhaber.com/images/t.gif

High efficiency – high output/volume ratio

http://www.faulhaber.com/images/kn5.gif

http://www.faulhaber.com/images/t.gif

Smooth running

 

 

Brakes - Electromagnetically Released System http://www.faulhaber.com/images/t.gifhttp://www.faulhaber.com/images/t.gif

 

Voltage Types

Diameter
(mm)

Static Torque Rating
(mNm)

Series

24

35

113

FSB001

 

12 ... 24

28.5

400

MBZ

 

 

 

 

 

 

 

 

 

 

 

 

 

DC-Tachogenerators and DC-Motor-Tacho Combinations

http://www.faulhaber.com/upload/P1258961129094.jpg

http://www.faulhaber.com/images/t.gif

http://www.faulhaber.com/images/kn5.gif

http://www.faulhaber.com/images/t.gif

Linear currrent / torque and speed / Back EMF characteristics

http://www.faulhaber.com/images/kn5.gif

http://www.faulhaber.com/images/t.gif

Stable single axis design

http://www.faulhaber.com/images/kn5.gif

http://www.faulhaber.com/images/t.gif

No cogging or preferred rotor position

http://www.faulhaber.com/images/kn5.gif

http://www.faulhaber.com/images/t.gif

No iron losses

http://www.faulhaber.com/images/kn5.gif

http://www.faulhaber.com/images/t.gif

Extremely low current consumption

http://www.faulhaber.com/images/kn5.gif

http://www.faulhaber.com/images/t.gif

Low starting voltage

http://www.faulhaber.com/images/kn5.gif

http://www.faulhaber.com/images/t.gif

Low rotor inertia for extremely fast acceleration and braking

http://www.faulhaber.com/images/kn5.gif

http://www.faulhaber.com/images/t.gif

Extremely light and compact

http://www.faulhaber.com/images/kn5.gif

http://www.faulhaber.com/images/t.gif

Custom systems available from design to production

http://www.faulhaber.com/images/kn5.gif

http://www.faulhaber.com/images/t.gif

Higher power to volume than other DC motor technologies

http://www.faulhaber.com/images/kn5.gif

http://www.faulhaber.com/images/t.gif

High precision gearboxes available in all sizes

http://www.faulhaber.com/images/t.gif

 

 

DC-Tachogenerators http://www.faulhaber.com/images/t.gif

 

 

 

Reversion
error

(±%)

EMF Constant up to
(mV/rpm)

Tolerance of the EMF Constant
(±%)

Operating speed
max
continuous
(rpm)
.

Length
(mm)

Diameter
(mm)

Series

0.2

4.3

1

5,000

 

25

 

22

 

 

 

DC-Motor-Tacho Combinations http://www.faulhaber.com/images/t.gif

 

 

 

Reversion
error

(±%)

EMF Constant up to
(mV/rpm)

Tolerance of the EMF Constant
(±%)

Operating speed
max. continuous

(rpm)

Length
(mm)

Diameter
(mm)

Series

0.2

1

2

5,000

41

18

1841...S

 

0.2

1.5

2

5,000

51

22

2251...S

 

 

 

 

 

 

 

maxon DC motor: Nothing else comes as close to 100%.

http://www.maxonmotorusa.com/images/arrow_right.gifDC motors with moving coil rotor and high performance permanent magnets

maxon DC motor programs may be distinguished as follows:

RE-Program

  • Æ 6 - 75 mm
  • 0.3 - 250 watts
  • Highest performance by using Neodymium- (NdFeB) magnets

S-Program

  • Æ 22 - 32 mm
  • 6 - 15 wattsAlNiCo magnets
  • Flexible program with many versions

A-Program

  • Æ 15 and 20 mm
  • 0.8 and 1.2 watts
  • AlNiCo magnets
  • Designed for optimum manufacturing efficiency the A-Program offers many of the advantages of the S-Program at lower cost.

F-Program

  • Æ 30 - 60 mm
  • 2.5 - 80 watts
  • Ferrite magnets
  • Often a very interesting price/performance ratio, in spite of the higher volume-to-power relationship.

Characteristics

  • Mechanical commutation (graphite or precious metal brushes)
  • Excellent volume/performance ratio
  • Highest efficiency
  • Low inductance
  • No magnetic cogging
  • High acceleration thanks to a low mass inertia
  • Low electromagnetic interference
  • Linear characteristics
  • High reliability
  • Multiple combination possibilities with gears, feedback devices and control electronics

Some applications
space robots, aircraft seats, packaging systems, conveyors, chip mounting systems etc.

Small micro drives for big applications.

http://www.maxonmotorusa.com/images/arrow_right.gif

  • Drive systems (DC and EC) with a diameter < 10 mm
  • Motor types: Ø 6 - 8 mm , 0.03 - 1.2 watts

Characteristics

  • Extreme small-sized design
  • Incorporation of high-tech ceramic components
  • Use of high energy magnets
  • Optimized volume/performance ratio
  • Assembled under clean-room conditions
  • Complete systems (motor, gearheads, feedback devices, control electronics)

Applications
drug delivery systems, prostheses, micro positioning units, PCB mounting systems etc.

maxon compact drive

All-in-one: brushless DC motor, feedback device and position controller.

http://www.maxonmotorusa.com/images/arrow_right.gif

  • Intelligent compact drives with a maximum 60 watts output
  • maxon compact drives feature controllers, sensors and motors in a modern aluminium casing
  • Connection according to the CANopen standard

Characteristics

  • Combination of proven maxon motor products (brushless maxon EC motor, digital MR encoder, fully digital EPOS positioning controller)
  • High power density
  • Compact design
  • Maintenance-free system (stand-alone)
  • Easy start-up procedure (wiring is kept to a minimum)
  • Easy programming (EPOS Studio software)
  • CANopen compatible
  • Can be combined with maxon planetary gears
  • Economical prices through substantial cost-savings

Applications
robotics, semiconductor equipment, weaving machines, imprinting equipment, packaging machines, laboratory equipment etc.

 

 

Planetary gears, spur gears and special gears

 

 

We develop the high-precision gear that best suits whatever you have in mind.

http://www.maxonmotorusa.com/images/arrow_right.gif

  • Customized special gears
  • Standard spur and planetary gearheads
    - Ø 6 - 81 mm
    - 0.002 - 120 Nm

Characteristics

  • Matched to maxon motors
  • Efficient transmission of torque and speed
  • Reduction ratios from 4:1 to 5752:1
  • High precision
  • Low noise level
  • Comprising high-tech CIM/MIM components
  • Autoclavable versions available

Applications
Wherever mechanical power is required at a high torque and corresponding reduced speed.

 

 

 

 

 

 

 

 

 

 

 

maxon EC motor, brushless DC minimotor

 

 

Minimotors with a strong performance for a long life. 

http://www.maxonmotorusa.com/images/arrow_right.gif

  • Electronically commutated (brushless) DC motors
  • Ø 6 - 60 mm
  • 1.2 - 400 watts

Characteristics

  • Electronically commutated
  • Neodymium magnets
  • Unsurpassed life time
  • No abrasion
  • Low noise level
  • High speeds even at low voltages
  • No magnetic cogging
  • Good heat dissipation, high overload ability
  • Very small electrical time constant and low inductance
  • Multiple combination possibilities with gears, feedback devices and control electronics
  • Autoclavable versions available

Some applications
handheld devices for surgery and dentistry, robotics, semiconductor equipment etc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Servo amplifier and position controller

 

Maintaining control has never been easier. Clever servo amplifiers and position controllers.

http://www.maxonmotorusa.com/images/arrow_right.gifControl electronics for DC and EC motors

  • 1 and 4-quadrant servoamplifiers
  • Positioning control units
    - MIP
    - EPOS (Easy-to-use Positioning) with CANopen interface

Characteristics

  • Matched to maxon motors
  • Comprehensive range of cables and accessories available
  • Customization if required

Dunkermotoren

Brushless DC-servo motors now with Profibus

At the SPS/IPC/DRIVES 2009 exhibition in Nuremberg from the 24th to the 26th November 2009, Dunkermotoren presented their DC-servo motors with PROFIBUS DP Interface. The manufacturer of drive solutions is expanding his product range with the well-established Interface Profibus DP V1.

 

Dunkermotoren is acquired by a new partner

Alcatel-Lucent, current partner of Dunkermotoren GmbH has decided to sell its shares of the Bonndorf/Germany based electric drive technology expert. The independent European private equity investor Triton takes over the shares as of January 1st 2010 with the strategy to strengthen Dunkermotoren's position in the electric drive system market on a long-term base. This transaction is subject to the approval of the antitrust authorities.

 

With Triton as new partner, Dunkermotoren will intensify its holistic strategical orientation to strengthen its abilities to innovate and to compete. All activities and business relations will be continued.

In the course of this transaction, Dunkermotoren GmbH will take over the production facility in Taicang as well as the sales company in the US as proprietor. The organisation structure of the complete company as well as the functions of the management team remain unchanged. The interfaces to the market and with them the contact persons for domestic as well as for international customers and suppliers will remain the same. The employees in the corresponding units in Bonndorf, in Taicang or in Crystal Lake (US sales company) will continue to be employed.

 

http://www.dunkermotoren.com/images/arrow_2.gifPRODUCTS

 

Direct product search

Stock program

Brushed DC motors GR/G

Brushless DC motors BG

AC motors KD/DR

Venetian blind drives D/DCD

Gearboxes PLG/SG

Brakes

Controllers

Encoders

Catalogue download

Technical information

Engineering reference

General request

 

 

 

ENCODERS 

 

 

 

 

 

The Dunkermotoren BG range of brushless, direct current motors (EC motors) are notable for:

  • Very long life
  • High efficiency
  • Highly dynamic acceleration
  • Good regulation characteristics
  • Wide speed range
  • High power density
  • Maintenance-free
  • Robust design
  • Integral Hall sensors for rotor position
  • Low moment of inertia
  • High degree of protection
  • Winding insulation - Class E or B
  • Neodymium magnets

These electronically-commutated DC motors can be combined with control electronics, gearboxes, and encoders in a modular system to provide a flexible, adaptable, market-oriented solution.

Further information and graphical representations of the commutation logic for these motors are available upon request.

series SERVO is a high speed, high precision and high efficiency servo system to make machine tools high speed, precise and compact.

FANUC SERVO MOTOR SYSTEM alpha i series

Nano Control

  • Servo motor with ultra smooth rotatiuon
  • Super high resolution Pulsecoder with 16,000,000/rev.
  • Servo amplifier with high precision current detector
  • High speed and high precision with

High Speed, High Efficiency

  • High speed and high acceleration spindle motor by winding switching conrol
  • Quick acceleraqtion and high response with

200V and 400V Input

  • Line-up with both 200V input and 400V input
  • Expansion of input voltage to AC480V

Compact & Reduced Wiring

  • Servo & spindle motor with shorter length
  • Compact and space saving servo amplifier

Enhanced Maintenance

  • Quick maintenance realized by ID and motor thermal information
  • Connector for Amplifier power connection

 

Large Servo Motor models with large torque and huge power, enabling electric drive of large industrial machines.
By utilizing latest rare-earth magnets, both compact size and large output are realized.
At the same time, by "Multiple drive with standard servo amplifiers" method, high reliability and maintainability are achieved.
Best suitable especially for electric injection machines, electric press machines.

 

 

 

FANUC AC SERVO MOTOR aiS series

 

series SERVO is highly reliable and high cost-performance AC servo system.
This servo system has performance and functions enough for feed axis and spindle axis of machine tools.

High speed, High precision, high effeciency processing by state-of-the-art SERVO HRV and SPINDLE HRV Control.

  • Smooth rotation and compact size Servo Motor
  • High resolution Pulsecoder (128,000/rev)
  • Compact size and high basic performance Spindle Motor
  • All-in-one packaged Servo Amplifier
    (servo 3 axes + spindle 1 axis)
  • State-of-the-art Servo and Spindle control and servo tuning tool SERVO GUIDE

 

FANUC SERVO MOTOR SYSTEM beta i series

 

 

 

 

 

 

 

 

 

 

 

 

series is AC Servo System with high cost performance, most suitable for positioning of industrial machines and peripheral equipments of machine tools.

FANUC SERVO MOTOR SYSTEM beta i series

FANUC LINEAR MOTOR LiS series, without deforming elements such as ball screw, or without wearing parts in mechanical structure, realizes high gain due to high rigidity of servo system, higher precision and maintenance free in mechanism. Additionally, rigid long stroke axis, increase of thrust force and multi-head configuration by arranging multiple coils on single magnet track are easily available.

*) "S" of LiS means "Strong motor with neodymium-iron magnets".

FANUC LINEAR MOTOR LiS series

High Speed and High Acceleration

Realizing maximum speed of 4m/s and maximum acceleration of over 30G, which is difficult to be realized by using rotary motor.

High Accuracy

Cooling tube embedded near to coil winding of heat source carries out heat efficiently. This cooling structure minimizes effect of heat transmission from motor to machine, which results in higher accuracy of machine. Additionally, original position detection circuit by treating analog signal from linear encoder, realizes detection system of 0.01µm resolution up to 4m/s speed. And latest digital servo control technology such as SERVO HRV control, enables smooth and high accuracy feed up to high speed.

Conforms to EMC Directive

FANUC LINEAR MOTOR LiS series conforms to EMC directive, so CE mark of the system will be easily acquired.

groschopp

 

 

DC electric servo-motor


 

Brushless AC/DC motors
BGK/NX (Brushless DC motors, housed block currented)
BGK/NV (Brushless-AC motors housed "VOLKSSERVO", sinus currented)

higher output-efficiency whilst
energy-saving, compared with
Induction-motors)

AC Motors

  • 115V or 230 V, 50/60 Hz
  • 1400-3400 RPM
  • 1/20-3/4 HP
  • Single or three-phase


http://www.groschopp.com/Portals/0/images/brushless_dc_thumb.jpgBrushless DC Motors

  • 12-163 VDC
  • 1/7-1/2 HP
  • Up to 6,000 RPM
  • Meets or exceeds UL Specs

 

DC Motors

  • Permanent Magnet
  • 12-180 VDC and 115 FWR
  • 1,000-5,000 RPM
  • 1/15-1/3 HP

 

 

Universal Motors

  • 12-250 V AC/DC
  • Up to 20,000 RPM
  • 1/5 to 2 1/4 HP
  • 2-Pole

heidenhain

اثثاااااثها

ی

HEIDENHAIN sealed linear encoder

Sealed Linear Encoders

Sealed linear encoders from HEIDENHAIN are protected from dust, chips and splash fluids and are ideal for operation on machine tools. An aluminum housing and elastic sealing lips protect the scale, scanning carriage and guideway from chips, swarf, dirt and splashwater The scanning carriage travels in a low-friction guide within the scale unit. It is connected to the external mounting block by a coupling that compensates unavoidable misalignment between the scale and the machine guideways.
Sealed linear encoders are available with full-size scale housings for high resistance to vibration up to 30 m measuring length, as well as slimline scale housing for limited installation space up to 2040 mm measuring length.  

 

Exposed Linear Encoders

Exposed linear encoders are designed for use on machines and installations that require especially high accuracy of the measured value.
Typical applications include:

  • Measuring and production equipment in the semiconductor industry
  • PCB assembly machines
  • Ultra-precision machines
  • High-accuracy machine tools
  • Measuring machines and comparators, measuring microscopes, and other precision measuring devices
  • Direct drives  

Mechanical design

Exposed linear encoders consist of a scale or scale tape and a scanning head that operate without mechanical contact. The scale of an exposed linear encoder is fastened directly to a mounting surface. The flatness of the mounting surface is therefore a prerequisite for high accuracy of the encoder.

BTF/PRF and PT Wire-Draw Encoders

Wire draw mechanisms are linear-torotational, industrial motion conversion modules, coupled with encoder feedback, to provide cost-effective linear position measurement solutions that precisely fit your requirements. These systems are housed in rugged industrial enclosures, and contain astainless steel or thermoplastic composite cable wound on a precise, constant-diameter spool. The cable is attached to the apparatus whose position is being measured, and is extended and retracted as the apparatus moves. A spring on the spool maintains cable tension. Position feedback is provided by a standard incremental or absolute rotary shaft encoder. These position transducers allow very flexible measuring paths, since the cable can be guided around obstacles using pulleys, etc. The heavy-duty enclosure of the encoder andspool housing provide excellent protection against contaminants, shock and other abuses.

KH 53 (Pomux®) and KH 53 Advanced
Long Distance Linear Encoders


This style of encoder is unique to

SICK STEGMANN, INC. and allows absolute measurement of up to 1.67 kilometers! The The KH 53 consists of two basic components: Omega Profile sections and the sensor head. Each Omega Profile section contains a number of powerful permanent magnets. The separation between each magnet is unique and never repeated. These unique separations build up a code over the complete measurement path. In a working system, several Omega Profiles sections are placed end to end along the complete measurement path. The total length of the system determines the number of profiles required. Each profile section is labeled with an identification number indicating the order in which the sections should be mounted. The sensor head moves over the Omega Profile sections without contact, and produces absolute positional data. The KH 53 allows a generous vertical tolerance of ±10 mm around a 25 mm nominal value, and a horizontal tolerance of ±10 mm around the centerline. The output is available in SSI, Interbus, and Profibus. Other networks can be realized using commercially available I/O modules. In addition, this modular system offers several benefits to the user. If the measurement length of the system needs to increase in the future, the user simply needs to mount the extra profiles required. If the Omega Profile become damaged, only the damaged sections need to be replaced.
The advanced KH 53 comes in measuring lengths of 54 m and 548 m, positional/mounting tolerance to +/- 20 mm; an operating temperature of -30...+70C and requires less installation time than the standard KH 53.

To preview the specifications of each model offered in the following subcategories simply select the category that closely matches your application requirement:

L 230 Magnetic (Lincoder®)

The Lincoder® system supplied by
SICK STEGMANN, INC. consists of a magnetic tape and sensorhead. The magnetic tape provides the scale for measuring systems up to 40 meters long. The absolute information is magnetized onto the tape in a 12-bit sequential code. This position information is enhanced by interpolation of sine/cosine signals provided by an additional incremental track that is magnetized on the tape. The magnetic tape is laminated onto a ferromagnetic steel strip,which is used both as a magnetic return path and a dimensionally stable mounting aid. The magnetic tape is supplied with an adhesive back for mounting by the user. A non-contact magnetic sensor with integrated electronics is mounted to the apparatus whose position is to be measured. As the sensor moves over the measuring tape, its position is output with a resolution as low as 1 µm over a 16 meter range, or 10 µm over a 40 meter range. Position data is output via real-time compensated SSI (Synchronous Serial Interface), HIPERFACE®,a or RS-485. The LinCoder is also programmable via RS-485, and a number of parameters such as offset, resolution and start points can be configured by the user.

BKS/XKS/PKS Wire Draw Encoders

In these compact wire draw encoders, the encoder is integrated into the wire draw mechanism to minimize the size of the unit.

The number of drum rotations, which is proportional to the length, is counted by an encoder and converted to a measuring signal. This provides high-resolution position or distance information for linear measurement paths, even under difficult mounting conditions.

Precise linear guidance, as required for other length measurement systems, is not necessary.

The choice between absolute, motor feedback and/or incremental wire draw encoders manufactured by SICK STEGMANN enables made-to-measure solutions for many application profiles.

-SSI interface for absolute wire draw encoders
-TTL interface for incremental wire draw encoders


are common interfaces in automation technology and meet its exacting requirements.

The measuring lengths of 2 m and 5 m cover most of the possible applications, for example in:

Presses, punching and injection machines, storage technology, wood and sheet metal processing machines, construction machinery, medical technology and many other industries.

 

Absolute, Non-Contact Linear Measuring System TTK70

 

http://www.stegmann.com/imgp/TTK70sm.jpg

http://www.stegmann.com/img/new-star.gif

Sensor housing dimensions: 70 x 30 x 14 (L x H x W) without connecter
Measuring length: max. 4000 mm.
Operating speed: 10m/s
Working temperature range:-30...+85oC
Supply voltage: Hiperface
Supply Voltage: 7...12 V DC
Protection: IP 65

 

 

L 230 Lincoder

 

http://www.stegmann.com/imgp/L230_Lincoder.jpg

Resolution: For SSI: 1 micron with calibrated tape, 10 micron with uncalibrated tape;
For Hiperface: 156.25 micron
Reproducibility: ± 10 micron
Measuring Length/Speed: 40 m max, 6 m/sec
Interface: SSI; Hiperface
Supply Voltage: SSI: 10...32 V; Hiperface: 7...12 V
Measurement Scale Type: Stationary magnetic tape with or
without glue
Protection Class: IP65
Electrical Connections: M23 12-pin connector

 

 

 

 

KH 53 Pomux and KH 53 Pomux Advanced

http://www.stegmann.com/imgp/KH_53_Pomux.jpg

KH 53
Pomux

KH 53 Advanced

Resolution:

0.1 mm

0.1 mm

Reproducibility:

0.3 mm

1.0 mm

Accuracy within
a Measuring Element:

+/- 1000 + ME (Tu - 25oC) TK µm

+/- 2000 + ME (Tu - 25oC) TK µm

Positional Tolerance:

+/- 10 mm

+/- 20 mm

Operating Temperature:

-20 ...+60oC

-30 ...+70oC

Measuring Length:

up to 1700 m

58 and 548 m

Interface:

SSI, Profibus DP (07hex), Class 2

SSI, Profibus DP (07hex), Class 2

Supply Voltage:

10...32 V

10...32 V

Measurement Scale Type:

Stationary Omega profiles with embedded magnets

Stationary Omega profiles with embedded magnets

Protection Class:

IP66

IP66

Electrical Connections:

SSI: M23 12-pin connectors; Profibus: 3 PG cable glands

SSI: M23 12-pin connectors; Profibus: 3 PG cable glands

 kubler 

Kubler portfolio stretches from miniature incremental encoders, via singleturn and multiturn encoders up to a wide range of ATEX and Heavy Duty products. Kubler by TURCK offer is completed by a selection of linear magnetic and draw wire systems. Naturally all popular interfaces including fieldbus interfaces are available. Kubler's patented Integrative Technology as well as its Intelligent Sensing Technology are setting new standards for reliability and compact design.

Kubler Electronic Electromechanical Counter Distributor
Kubler Counting Technology

Our wide, diverse variety of electromechanical counters as well as our miniature counters for PCB mounting - our special area of expertise - make ideal time/pulse counters for use in pumps, lift, dryers, UV lamps, kWh meters etc. Kubler CODIX series offers functional, low-cost electronic display counters, position indicators, timer and Rate Indicators. And our electronic preset counters allow for distributed control and a reduction in cycle times.

Kubler Codix 529 LED Process Displays Distributor
Kubler Process Technology

Our user-friendly, compact and functionally well thought-out CODIX process displays and controllers are suitable for all linear and non-linear analogue signals. Our temperature displays and controllers lend themselves either to mounting in a panel or on a DIN-Rail.

Founded by Fritz Kubler in 1960 with the introduction of the patented KM1 timer meter, Fritz Kubler has expanded to become a global technology leader in the field of encoders. Located in the Black Forest of southern Germany, Kubler is family owned and managed with great pride in over 50 countries with a rapidly increasing staff dedicated to meet customer requirements quickly and reliably. Kubler Encoders, a complete line of incremental and absolute encoders with unique advantages, including temperature and aging compensation, plus improved EMI, vibration and shock resistance.

Our wide, diverse variety of electromechanical counters as well as our miniature counters for PCB mounting - our special area of expertise - make ideal time/pulse counters for use in pumps, lift, dryers, UV lamps, kWh meters etc. Kubler CODIX series offers functional, low-cost electronic display counters, position indicators, timer and rate indicators. And our electronic preset counters allow for distributed control and a reduction in cycle times.

Our user-friendly, compact and functionally well thought-out CODIX process displays and controllers are suitable for all linear and non-linear analogue signals. Our temperature displays and controllers lend themselves either to mounting in a panel or on a DIN-Rail.

Our Kubler distributors warehouse in Boise, Idaho stocks some Kuebler Products (Kubler Displays Controllers Encoders Counters Distributor) enabling us to further assist you in finding the correct Kuebler encoders for your application in the USA (Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington Washington D.C. West Virginia Wisconsin Wyoming), Canada and Mexico.

Whether we have Kuebler Counters in stock in Boise, Idaho or need to get them from Kubler; Clearwater Tech can get Kuebler Displays to you fast and save money!

It will be very helpful if you have the Kuebler Controller part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Kubler Encoders that you are looking for in seconds. If you do not have the part numbers for Kubler Counters, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

 

Kubler Absolute Singleturn Encoder Type 2450 Shaft / 2470 Hollow Shaft Distributors
Kubler Type 2450/2470 Single-Turn Encoders

Kubler Absolute Singleturn Encoder Type 2450 (Shaft) / 2470 (Hollow Shaft)

  • Ensures long service life and reliability of the application, no wear. Non-contact measuring system
  • Can be used for a wide temperature range without additional expense. Wide temperature range
  • Robust cable outlet. High strain-relief thanks to multiple clamping
  • Can be used where space is tight. Overall diameter of only 24 mm. Shaft diameter min. 4 mm


Kubler Sendix F36 Series Singleturn Encoders

Kuebler Sendix Absolute Singleturn Type F3653 (Shaft) / F3673 (Blind / Hollow Shaft) SSI/BiSS

  • TURCK introduces an optical encoder series designed completely without gears to eliminate wear and sensitivity to magnetic fields. The Kubler by TURCK F36 encoder series' compact size of only 36 mm with a hollow shaft diameter of up to 10 mm makes them well-suited for drive engineering and medical applications.
  • F36 singleturn encoders have a resolution of up to 17 bits; multiturn encoders have a resolution of up to 41 bits with over 16 million revolutions. An IP 67 protection rating and a temperature range of -40 to 90°C makes the encoders able to withstand harsh environmental conditions.

Kubler Sendix Absolute Singleturn Encoders Type 3650 (Shaft) / 3670 (Hollow Shaft) SSI Distributors
Kubler Type 3650/3670 Single-Turn Encoders

Kubler Sendix Absolute Singleturn Encoders Type 3650 (Shaft) /3670 (Hollow Shaft) SSI

  • Ensures long service life and reliability of the application, no wear. Non-contact measuring system
  • Stays sealed even when subjected to harsh everyday use. Offers security against failures in the field. Solid die-cast housing with up to IP 69K protection
  • Can be used for a wide temperature range without additional expense. Wide temperature range (-40 °C to +85 °C)
  • Increased ability to withstand vibration and installation errors. Eliminates machine downtime and repairs. High shock resistance (> 500g) and vibration resistance (>30g)

Kubler Sendix Absolute Singleturn Encoders Type 3651 (Shaft) /3671 (Hollow Shaft) Analogue Distributors
Kubler Type 3651/3671 Single-Turn Encoders

Kubler Sendix Absolute Singleturn Encoder Type 3651 (Shaft) / 3671 (Hollow shaft), Analogue

  • Ensures long service life and reliability of the application, no wear Non-contact measuring system
  • Stays sealed even when subjected to harsh everyday use. Offers security against failures in the field Solid die-cast housing with up to IP 69K protection
  • Can be used for a wide temperature range without additional expense. Wide temperature range (-40 °C to +85 °C)
  • Increased ability to withstand vibration and installation errors. Eliminates machine downtime and repairs. High shock resistance (> 500g) and vibration resistance (>30g)
  • Can be used in outdoor applications with large fluctuations in temperature. Resistant against humidity and condensation.

Kubler Sendix Absolute Singleturn Encoders Type 3658 (Shaft) /3678 (Hollow Shaft) Distributors
Kubler Type 3658/3678 Single-Turn Encoders

Kuebler Sendix Absolute Singleturn Encoder Type 3658 (Shaft) / 3678 (Hollow Shaft)

  • Ensures long service life and reliability of the application, no wear Non-contact measuring system
  • Stays sealed even when subjected to harsh everyday use. Offers security against failures in the field Solid die-cast housing with up to IP 69K protection
  • Can be used for a wide temperature range without additional expense. Wide temperature range (-40 °C to +85 °C)
  • Increased ability to withstand vibration and installation errors. Eliminates machine downtime and repairs. High shock resistance (> 500g) and vibration resistance (>30g)
  • Can be used in outdoor applications with large fluctuations in temperature. Resistant against humidity and condensation.

Kubler Universal Type 5850 (Shaft) / 5870 (Hollow Shaft) Analogue Parallel Encoders Distributors
Kubler Type 5850/5870 Single-Turn Encoders

Kubler Universal Type 5850 (Shaft) / 5870 (Hollow Shaft) Analogue Parallel Encoders

  • Highest shock resistance on the market (=2500 m/s2, 6 ms acc. to DIN IEC 68-2-27)
  • Parallel interface
  • Divisions: up to 16384 (14 bits), singleturn
  • Housing ø 58 mm
  • Shaft version: IP 65 Hollow shaft version: IP 66
  • Various options (e.g. LATCH, SET)
  • Gray, Binary or BCD code
  • Short-circuit proof outputs

Kubler Standard Type 5852 (Shaft) / 5872 (Hollow Shaft) Encoders Distributors
Kubler Type 5852/5872 Single-Turn Encoders

Kubler Standard Type 5852 (Shaft) / 5872 (Hollow Shaft) Encoders

  • Parallel interface
  • Improved EMC characteristics
  • Divisions: up to 2000 Gray-Excess or up to 16384 (14 bits) Gray, singleturn
  • ø 58 mm shaft version
  • Shaft version: IP 65 & Hollow shaft version: IP 66
  • Count direction reversible
  • Temperature and ageing compensation
  • Short-circuit proof outputs

Kubler Type 5853/5873 Singleturn Absolute Shaft Encoders Distributor
Kubler Type 5853/5873 Single-Turn Encoders

Kubler Absolute Shaft Encoders Sendix absolut, Singleturn Type 5853 (Shaft) / 5873 (Hollow shaft), SSI/BiSS

  • Increased ability to withstand vibration and installation errors. Eliminates machine downtime and repairs. Sturdy "Safety-Lock Design" bearing structure
  • Fewer components and connection points increase the operational reliability Kübler OptoASIC technology with highest integration density (Chip-on-Board)
  • Remains sealed even when subjected to harsh everyday use. Thus suitable also for outside use. Resistant die cast housing and protection up to IP 67
  • Can be used in a wide temperature range without additional expense Wide temperature range (-40°C to +90°C)
  • Easy diagnostic in case of trouble Status indication by means of LED, sensor, voltage and temperature monitoring

Kubler Stainless steel (Niro) Type 5876 Encoders Distributors
Kubler Type 5876 Single-Turn Encoders

Kuebler Stainless steel (Niro) Type 5876 Encoders

  • Integrative Technology Patented new type of construction integrates all components; use of an opto-asic and 6-layer multilayer technology now on just a single PCB
  • resolution up to 14 bits. Improved EMC-characteristics and highest shock resistance on the market (>2500 m/s2, 6 ms acc. to DIN IEC 68-2-27).
  • SSI or parallel interface

Kubler Sendix Absolute Singleturn Type 5858 (Shaft) / 5878 (Hollow Shaft) Profibus-DP Distributors
Kubler Type 5858/5878 Singleturn Encoders

Kubler Sendix Absolute Singleturn Type 5858 (shaft) / 5878 (Hollow shaft) CANopen

  • Increased resistance against vibrations and installation mistakes. Avoids machine stops and repair work
  • Few components and connection points increase the operational reliability
  • Remains tight, even in roughest environments, ensures highest safety against field breakdowns
  • Can be used in a wide temperature range without additional charge
  • Up-to-the minute field bus performance in the application
  • Fast data availability while reducing the load on the bus and the control

Kubler Type 7031 With ATEX Approval Encoders Distributors
Kubler Type 7031 ATEX Approval Single-Turn Encoders

Kubler Type 7031 With ATEX Approval Encoders

  • Version "flameproof-enclosure": approval zones 1, 2 and 21, 22
  • Zones 1, 2 and 21, 22: Ex II 2G EEx d II C T6 and Ex II 2D IP6x T85°C
  • High resolution: max. 5000 ppr.
  • Choice of construction: Through hollow shaft or solid shaft up to max. ø 12 mm.
  • Can be used even where space is tight: installation depth only 94 mm, minimal clearance required - thanks to through hollow shaft

Kubler Multiturn Type 5860 DeviceNet Absolute Encoders Distributors
Kubler Type 5860 Multi-Turn Encoders

Kuebler Multiturn Type 5860 DeviceNet Absolute Encoders

  • Minimal installation depth
  • High shock and vibration values
  • Very compact (only 87.8 mm installation depth); Ideal for dynamic applications thanks to its non-contact multiturn stage
  • Certificated connection technology
  • Plug & Play cable assemblies
  • Long service life thanks to high shock and vibration resistance
  • Diagnostics and alarm functions

Kubler Multiturn Type 5862 (Shaft) / 5882 (Hollow Shaft) SSI or RS 485 Programmable Distributors
Kubler Type 5862/5882 Multi-Turn Encoders

Kubler Multiturn Type 5862 (Shaft) / 5882 (Hollow Shaft) SSI or RS 485 Programmable Encoder

  • Electronic multiturn gear with intelligent sensing technology (IST)
  • Integrative Technology
  • Max. 4 programmable outputs* for the SSI version
  • Programmable parameters include*: code type, resolution per revolution, total resolution, direction of rotation (cw or ccw), zero point
  • Resolution: up to 8192 (13 bits) per revolution, 4096 (12 bits) revolutions
  • Protection IP 65
  • Short-circuit proof at 5 V DC
  • With optional incremental track 2048 ppr.
  • Hollow shaft version: Only 40.5 mm clearance needed, thus lower profile than incremental encoders

Kubler Sendix Absolute Multiturn Type 5863 (Shaft) / 5883 (Hollow Shaft) SSI/BiSS Distributors
Kubler Type 5863/5883 Multi-Turn Encoders

Kubler Sendix Absolute Multiturn Type 5863 (Shaft) / 5883 (Hollow Shaft) SSI/BiSS Encoders

  • Increased ability to withstand vibration and installation errors. Eliminates machine downtime and repairs. Sturdy "Safety-Lock Design" bearing structure
  • Fewer components and connection points increase the operational reliability Kübler OptoASIC technology with highest integration density (Chip-on-Board)
  • Remains sealed, even in the roughest environments, ensures highest safety against field breakdowns Resistant die cast housing and protection up to IP 67
  • Can be used in a wide temperature range without additional expense Wide temperature range
  • Easy diagnosis in case of fault condition Status indication by means of LED, sensor, voltage and temperature monitoring.

Kubler Sendix Absolute Multiturn Type 5868 (Shaft) / 5888 (Hollow Shaft) Profibus-DP Distributors
Kubler Type 5868/5888 Multi-Turn Encoders

Kubler Sendix Absolute Multiturn Type 5868 (Shaft) / 5888 (Hollow Shaft) CANopen/CANlift Encoder

  • Increased ability to withstand vibration and installation errors. Eliminates machine downtime and repairs. Sturdy "Safety-Lock Design" bearing structure
  • Fewer components and connection points increase the operational reliability Kübler OptoASIC technology with highest integration density (Chip-on-Board)
  • Remains sealed, even in the roughest environments, ensures highest safety against field breakdowns Resistant die cast housing and protection up to IP 67
  • Can be used in a wide temperature range without additional expense Wide temperature range

Kubler Multiturn Type 9080 CANopen/DeviceNet Encoders Distributors
Kubler Type 9080 Multi-Turn Encoders

Kuebler Multiturn Type 9080 Profibus-DP Encoders

  • Field bus interface: PROFIBUS-DP
  • Hollow shaft up to Ø 28 or shaft Ø 12 mm
  • Shock resistant up to 250 g
  • Only 60 mm clearance needed
  • Patented integrative technology
  • Very easy mounting of the hollow shaft version. The encoder is mounted directly on the drive shaft without coupling. This saves up to 30 % cost and 50 % clearance compared to shaft versions.
  • Divisions: up to 8192 (13 bits) per revolution, 4096 (12 bits) revolutions
  • Non-contact multiturn gear with new Intelligent-Sensing-Technology (IST)
  • Simple connection via connecting system (patent pending) - with removable socket box
  • Integrated T-coupler
  • Protection: IP 65

Kubler Multiturn Type 9081 SSI or RS 485 Programmable Encoders Distributors
Kubler Type 9081 Multi-Turn Encoders

Kubler Multiturn Type 9081 SSI or RS 485 Programmable Encoders

  • Hollow shaft up to ø 28 mm or shaft ø12 mm
  • Only 50 mm clearance needed
  • Programming parameters include*: code type, resolution per revolution, total resolution, direction of rotation (cw or ccw), zero point.
  • Very easy mounting of the hollow shaft version. The encoder is mounted directly on the drive shaft without couplings. This saves up to 30 % cost and 50 % clearance compared to shaft versions.
  • Max. 4 programmable outputs* for the SSI version
  • Divisions: 8192 (13 bits) per revolution, 4096 (12 bits) revolutions
  • Electronic multiturn gear with patented intelligent sensing technology (IST)
  • optional with incremental track 2048 ppr.

Our Kulber Encoder distributors warehouse in Boise, Idaho stocks some Kubler by TURCK Products (Kubler Absolute Encoders Hollow Shaft Profibus CANopen Multiturn Singleturn Stainless Steel Absolute Encoder Distributors) enabling us to further assist you in finding the correct Kubler Absolute Encoders for your application in the USA (Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington Washington D.C. West Virginia Wisconsin Wyoming), Canada and Mexico.

Whether we have Kubler Absolute Encoders in stock in Boise, Idaho or need to get them from Kubler/TURCK; Clearwater Tech can get Kubler Absolute Encoders to you fast and save money!

It will be very helpful if you have the Kubler Absolute Encoder part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Kubler Absolute Shaft Encoders that you are looking for in seconds. If you do not have the part numbers for Kubler Absolute Hollow Shaft Encoders, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

 

 

 

 

 

Stegmann

 

It is quite amazing to discover where SICK | STEGMANN products are used.

Actuating devices, manufactured by SICK | STEGMANN are found in apparatus construction (lighting engineering, flip-over displays), in machine construction and printing technology (pressing and grinding machines, drive technology) as well as in measuring and control engineering (water control, metering technology, time switches).

SICK | STEGMANN encoders are used in servodrives and controls, (drive technology, electronic cams) in plant construction (conveying and warehousing technology, stage construction, navigation), and in machine construction (packaging machinery, machine tools, robots).

These are only a few examples of the wide variety of applications for SICK | STEGMANN products. One thing is common to them all: they are always focused on the needs of the customer. Whether you choose standard solutions or an individual approach, our product range will have what is right for you. Put us to the test!

Length Measuring Systems

http://www.stegmann.com/img/absolute.jpg

 


FEATURES & BENEFITS

  • Compact (the most compact motor feedback system with Hiperface® on the market today)
  • High Resolution
  • Long measuring lengths
  • Precise
  • High speed
  • Robust
  • High Quality Control

BTF/PRF and PT Wire-Draw Encoders

Wire draw mechanisms are linear-torotational, industrial motion conversion modules, coupled with encoder feedback, to provide cost-effective linear position measurement solutions that precisely fit your requirements. These systems are housed in rugged industrial enclosures, and contain astainless steel or thermoplastic composite cable wound on a precise, constant-diameter spool. The cable is attached to the apparatus whose position is being measured, and is extended and retracted as the apparatus moves. A spring on the spool maintains cable tension. Position feedback is provided by a standard incremental or absolute rotary shaft encoder. These position transducers allow very flexible measuring paths, since the cable can be guided around obstacles using pulleys, etc. The heavy-duty enclosure of the encoder andspool housing provide excellent protection against contaminants, shock and other abuses.

KH 53 (Pomux®) and KH 53 Advanced
Long Distance Linear Encoders


This style of encoder is unique to
SICK STEGMANN, INC. and allows absolute measurement of up to 1.67 kilometers! The The KH 53 consists of two basic components: Omega Profile sections and the sensor head. Each Omega Profile section contains a number of powerful permanent magnets. The separation between each magnet is unique and never repeated. These unique separations build up a code over the complete measurement path. In a working system, several Omega Profiles sections are placed end to end along the complete measurement path. The total length of the system determines the number of profiles required. Each profile section is labeled with an identification number indicating the order in which the sections should be mounted. The sensor head moves over the Omega Profile sections without contact, and produces absolute positional data. The KH 53 allows a generous vertical tolerance of ±10 mm around a 25 mm nominal value, and a horizontal tolerance of ±10 mm around the centerline. The output is available in SSI, Interbus, and Profibus. Other networks can be realized using commercially available I/O modules. In addition, this modular system offers several benefits to the user. If the measurement length of the system needs to increase in the future, the user simply needs to mount the extra profiles required. If the Omega Profile become damaged, only the damaged sections need to be replaced.
The advanced KH 53 comes in measuring lengths of 54 m and 548 m, positional/mounting tolerance to +/- 20 mm; an operating temperature of -30...+70C and requires less installation time than the standard KH 53.

To preview the specifications of each model offered in the following subcategories simply select the category that closely matches your application requirement:


L 230 Magnetic (Lincoder®)

The Lincoder® system supplied by
SICK STEGMANN, INC. consists of a magnetic tape and sensorhead. The magnetic tape provides the scale for measuring systems up to 40 meters long. The absolute information is magnetized onto the tape in a 12-bit sequential code. This position information is enhanced by interpolation of sine/cosine signals provided by an additional incremental track that is magnetized on the tape. The magnetic tape is laminated onto a ferromagnetic steel strip,which is used both as a magnetic return path and a dimensionally stable mounting aid. The magnetic tape is supplied with an adhesive back for mounting by the user. A non-contact magnetic sensor with integrated electronics is mounted to the apparatus whose position is to be measured. As the sensor moves over the measuring tape, its position is output with a resolution as low as 1 µm over a 16 meter range, or 10 µm over a 40 meter range. Position data is output via real-time compensated SSI (Synchronous Serial Interface), HIPERFACE®,a or RS-485. The LinCoder is also programmable via RS-485, and a number of parameters such as offset, resolution and start points can be configured by the user.

BKS/XKS/PKS Wire Draw Encoders

In these compact wire draw encoders, the encoder is integrated into the wire draw mechanism to minimize the size of the unit.

The number of drum rotations, which is proportional to the length, is counted by an encoder and converted to a measuring signal. This provides high-resolution position or distance information for linear measurement paths, even under difficult mounting conditions.

Precise linear guidance, as required for other length measurement systems, is not necessary.

The choice between absolute, motor feedback and/or incremental wire draw encoders manufactured by SICK STEGMANN enables made-to-measure solutions for many application profiles.

-SSI interface for absolute wire draw encoders
-TTL interface for incremental wire draw encoders


are common interfaces in automation technology and meet its exacting requirements.

The measuring lengths of 2 m and 5 m cover most of the possible applications, for example in:

Presses, punching and injection machines, storage technology, wood and sheet metal processing machines, construction machinery, medical technology and many other industries.

 

 

Incremental Rotary Encoders

http://www.stegmann.com/imgp/incremental.jpg

To preview the specifications of each Incremental Rotary Encoder model offered in the following subcategories simply select the category that closely matches your application requirement:

Powered By
تمامی حقوق این سایت متعلق به شرکت فاتحین صنعت شریف می باشد