The PT2060

is a state-of-the-art rack based continuous monitoring system that is ideal for virtually all critical machinery protection applications. It offers both superior configuration flexibility and maximum reliability.

Capable of supporting up to 48 channels per rack, the PT2060 provides the industry’s highest channel density in a standard 19″ rack. It uses standard “ladder logic” to make configuration easy. With full API 670 compliance and triple channel redundancy and double redundancy for relays, power supplies, analog outputs and communications, it provides a level of reliability that is unsurpassed, even by systems costing much more! 

PT2060 Features include:

Fully digital
Modbus ready
API 670 compliant
Compatible with most sensors and probes, regardless of manufacturer
Configured using standard “ladder logic”, just like a PLC
riple redundant channels
Double redundant relays, power suppliers, analog outputs and communications modules
Up to 48 channels per rack
Optional local panel display
Integrated condition monitoring functions

Provib Tech

 

TR series

vibration transmitter uses advanced LSI technology that integrate the signal conditioning, processing and outputting circuitry into one integral unit. It can directly replace the probe driver and connect to the proximity probe and extension cable, converting the signal to a 4-20 mA output. Buffered dynamic output is available for additional analysis.

TR Series Transmitter is used to monitor:
Radial Shaft Vibration
Axial Thrust Position
Rotation Speed
Phase Reference

The TR is available as a two wire or three-wire transmitter configuration and certified for use in hazardous areas.
The TR series also has an option available to interface with existing proximity probe drivers. This option is typically used when it is desirable to drive the dynamic signal and the 420mA output up to 300 meters or for some hazardous area applications.

Provib Tech

 

TM Series proximity probes

are used for a wide variety of applications. Suitable for continuous monitoring systems protection of critical machinery as well as machine contrition monitoring analysis used for diagnosing matching faults. They measure both static distances and the vibration of the shaft relative to the probe tip; shaft bib ration, radial and axial shaft position, and shaft/case differential expansion.

They are interchangeable with probes used for most major brands of monitoring systems and their high reliability insures a ling life cycle.
Available in 5, 8, 11, and 25 mm configurations, complete with extension cables and probe drives or transmitters.
Available options include:

API 670 compliant
English or metric output
Reverse mounting
Extension cables
Integral Cables
Armored cables
Probe Drivers or Transmitters
High pressure feed through
Hazardous area certifications
CE
ATEX, II 1 G, EEx aii IIC T4 (pending)
CSA, Class 1, Div. 1, Grps A,B,C&D (pending)

Provib Tech

 

The PT500 

Mechanical Vibration Switch provides an economical solution for basic vibration monitoring of a wide variety of rotating and reciprocating equipment. Its reliable vibration sensing mechanism actuates a set of internal contacts when vibration levels exceed the adjustable set point.

The unique design has all industry required hazardous area and environment certifications, including: 

Applications: Motors Industrial Fans Heat Exchangers/ Cooling Towers Engines Reciprocating Compressors Centrifuges Rock or Coal Crushers

Features: Easy replacement of existing vibration switches Universal mounting plates and studs NEMA 4X, IP65 environmental rating Wide temperature range of -40°C to 100°C Local and remote reset Start-up delay SPDT, (2) SPDT and gold contact options Hazardous area approvals: CSA, ATEX, CE

Universal mounting bracket allows for easy replacement installation

Provib Tech

 

ProvibTech’s PCM360

is a machine condition management system that collects, stores, analyzes and is capable of transmitting machine status monitoring information over local or wide area network. The PCM360 provides static, dynamic and transient data collection and analysis; such as graphical indication of vibration level, trend, waveform, spectrum, bode plots, cascade plots and much more. 
All ProvibTech’s monitors and transmitters can quickly and easily be integrated to upload machine status and its dynamic data to the PCM360. The PCM360 obtains both critical machinery running status and balance of plant running status. Additionally, the PCM360 collects process data as 4-20mA input or digital monitor input via Modbus, etc. The PCM360 provides an integrated system solution for asset management resulting in a total solution for machine maintenance and protection.

فاتحین صنعت شریف